If I had a dollar for every time someone asked, “How long does it take to install a garage door?” I’d probably be able to treat myself to a nice steak dinner. It’s a good question, though, and one I hear often. After all, a garage door isn’t just any door—it’s one of the largest, heaviest moving parts of your home. And installing it? That’s no small task.
So, let’s get straight to the point: on average, it takes about 4 to 6 hours to install a garage door. But before you plan your day around that number, there are a few things to consider. With over three decades of experience in garage door installation in Oakville, I can tell you that the time it takes depends on several factors. The type of door, the setup you currently have, and even the skill of the installer all play a role.
Here’s the deal: every job is unique. Whether you’re upgrading your home in Oakville with a sleek, modern door or replacing an older model that’s seen better days, understanding the process and what impacts the timeline can help you prepare. Let me break it down further, sharing some stories and insights I’ve picked up along the way.
The Type of Door Matters, More Than You’d Think
Now, if you’re dealing with a standard single-car garage door, with no fancy frills, you’re looking at the lower end of that time estimate. But if you’ve got a double-door, an insulated or extra-heavy model, or—heaven help us—a custom wooden door, it’s going to take a little longer. And that’s not me being lazy, it’s just physics and logic.
I had a job a while back where the customer picked a beautiful, heavy wooden door that was more of a piece of art than a door. Gorgeous thing, really. Took us a good eight hours to get it in, balanced, and working smoothly. With those heavier doors, the weight adds complexity to just about every step: positioning, balancing, and setting up the springs. Speaking of springs…
Spring Systems Are No Joke
Every garage door has a spring system, and they’re the backbone of the whole setup. Now, when it comes to springs, you’ve got two options: torsion and extension springs. In my experience, torsion springs—though pricier upfront—are the more durable choice. But they also add a bit of time to the installation process because they need to be wound precisely.
I can’t count how many times a job has been delayed because of those darn springs. I remember one installation where the previous installer had used the wrong spring size, which threw off the door’s balance. It took us an extra hour just to fix that mess before we could even start the new installation. So, lesson learned: never skimp on the springs, and make sure you’re using the right ones from the get-go.
Removing the Old Door Can Be a Mixed Bag
If you’re replacing an old door, you’ve got to add removal time into the mix. Some doors come off in 15 minutes; others feel like they’ve been glued in place. I once had a customer with an old metal door that had rusted over the years. Let me tell you, getting that thing off was a beast of a job—took us nearly an hour just to pry it free without damaging the frame.
A lot of folks try to save a few bucks by handling the removal themselves. My advice? If you’re not familiar with garage door setups, let the pros do it. Those doors are heavier than they look, and if you drop one, it can dent the floor, the frame, or, worse, your foot.
Electrical Setups and Opener Compatibility
Now, if you’re installing a garage door opener too, tack on another 2 hours. It’s not overly complicated, but it takes precision, especially with the wiring and alignment. I’ve seen my fair share of DIY setups where the opener isn’t aligned properly, and it ends up burning out the motor faster or causing the door to jam.
Not every door opener fits every door, either. You’d be surprised how often I see mismatched openers that make the whole system grind and shudder. If you’re not sure about compatibility, feel free to contact us, and I’ll try to help.
Prep Work Is the Unsung Hero of Installation
I’m a big believer in prep work, and I don’t just mean measuring the space. You’ve got to make sure the tracks are clean, the area is free of debris, and that everything is leveled. I’ve walked into jobs where the previous installer left the tracks dirty or unbalanced, which caused no end of problems. It’s the little things that make a difference, especially when you’re dealing with a system that relies on smooth movement and balance.
I always say, “Measure twice, cut once,” and for a reason. A friend of mine once skipped the leveling step on a particularly tricky installation, thinking he could eyeball it. Well, let’s just say it took twice as long to fix that mistake.
So, How Long Does It Take?
For a straightforward job, I’d estimate around 4 hours. For something with all the bells and whistles—like a custom double-door setup with an opener and high-end insulation—expect a full day’s work. But here’s the kicker: good installers, the ones who care about doing it right, won’t rush. Quality takes time, and it’s better to spend an extra hour or two making sure everything’s perfect than to have problems down the line with servicing your door
